Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Hemet, CA
We provide independent Lennox air duct cleaning across Hemet, CA. The thing that makes our Lennox work here different is simple: we know exactly what 25 to 45 years of San Jacinto Valley dust and summer heat does to the flex duct and evaporator coils on these systems. If your Lennox air handler has been pushing air through the original attic duct runs, you’re breathing whatever has settled in them. Call (844) 728-0966 for a free estimate.
Why Hemet Residents Choose Us for Lennox Service
Noel Quintero started this company because he got tired of seeing duct cleaners show up with a shop vac and a drill brush, then call it a day. We run Rotobrush rotary agitation paired with Nikro HEPA extraction on every Lennox system we touch in Hemet. The brush knocks silt off the duct walls. The HEPA rig captures it before it re-enters your living room. That combination matters more here than almost anywhere else in Southern California, because Hemet’s ducts load up with a finer, drier grit than you’d find in coastal homes.
We’re an independent shop, not a Lennox authorized dealer. That’s an advantage. Nobody’s telling us to push a new air handler when your real problem is a torn flex run in the attic. For years we’ve worked on Lennox Merit, Elite, and older builder-grade Signature systems throughout 92543, 92544, 92545, and 92546, so we know where these duct designs fail. Our full-service scope also covers Lennox sales & service support when repairs outgrow a cleaning call.
Noel studied HVAC fundamentals at Mt. San Jacinto College before narrowing his focus to duct systems, and he’s been cleaning them across the Inland Empire for the better part of two decades. He runs every Hemet job personally, with the same truck-mounted rig and the same rule: “If I can’t tell you exactly what I found and exactly what I did about it, I haven’t done my job.”
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Hemet
- Brittle attic flex duct on 1980s-90s Lennox builds in 92545. The inner liner on original builder-grade flex gets baked hard by summers that routinely cross 100°F. It cracks, tears, and sags at low points, and those low points collect the fine desert silt that blows in from the San Jacinto Valley floor. A cleaning alone won’t fix a torn liner. We camera-inspect first, then clean and repair in the same visit.
- Silt-caked evaporator coils on Merit and Elite air handlers. Hemet’s dry wind pushes dust through return grilles faster than most homeowners realize. That dust ends up on the coil. A caked coil restricts airflow, which makes the blower work harder and pushes your summer electric bill up. We clean the coil as part of a full duct service, not as a separate upsell.
- Loose rigid metal duct joints in 1960s-70s Lennox systems in 92543 and 92544. Those older tract homes often still have original rigid metal supply runs. The joints loosen over time, leak conditioned air into the attic, and pull grit back through return grilles. We mastic-seal them and re-insulate where needed.
- Blower wheel imbalance from accumulated silt after Santa Ana events. A dry Santa Ana wind event dumps a layer of dust into Hemet’s outdoor air, and within weeks that dust is on your blower wheel. The imbalance causes vibration and drops static pressure. You hear it, you feel it, and it shortens motor life.
- Disconnected flex sections in Sun City attics. In 92545, we frequently find flex sections that have pulled apart entirely, dumping conditioned air straight into the attic. The registers downstream get weak airflow, and the homeowner keeps turning the thermostat down. A camera inspection shows exactly where the disconnect is before we clean and reseal.
Lennox Service in Hemet: What Local Conditions Mean for Your Equipment
Here’s the pattern we see in Hemet that we don’t see in Riverside or the coast. Sun City’s 55-plus communities in 92545 were built fast in the 1980s and 1990s, and most of those homes still have the original builder-grade flex duct in the attic. Inland heat doesn’t just make that duct hot. It bakes the inner liner until it’s brittle as a cracker. Dry Santa Ana winds push silt from the surrounding hills onto and into the homes. The combination means a “routine” Lennox duct cleaning in 92545 turns into a camera-inspection-then-repair job far more often than anywhere else we work. We’ve pulled cameras through 1990s Lennox systems in Sun City and found liners with splits running the full length of a run, plus disconnected sections above the return plenum. A cleaning would have been pointless without the repair. That’s the local reality. A generic Hemet page won’t tell you that because they don’t do repair. A generic Lennox page won’t tell you that because they don’t know these attics. We do both.
Lennox Models & Products We Service in Hemet
We clean and repair duct systems paired with Lennox Merit Series gas furnaces and air handlers, Elite Series air conditioners and heat pumps, and Signature Collection variable-capacity systems. That includes the older builder-grade Lennox furnaces still running in 1980s and 1990s tract homes across Hemet. When parts are needed, we use OEM Lennox components for blowers and coil-related work, because fit and longevity matter there. For flex duct, mastic, and insulation, we use quality aftermarket material that meets or exceeds spec. We’ll tell you honestly when a duct run is worth repairing versus replacing, and we won’t upsell you an air handler you don’t need. If you’re in a city we serve elsewhere in the valley, Hemet service area coverage includes every ZIP code we’ve listed here today.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Hemet
Full air duct cleaning for a single-family Lennox system in Hemet typically runs $350 to $600, depending on the home’s square footage and how many returns are involved. If we add evaporator coil cleaning, that’s usually another $150 to $250. Flex duct repair or replacement is quoted after a camera inspection and varies by the number of runs, but most 92545 repair jobs we do fall between $200 and $500 per run when factoring in mastic and insulation. Dryer vent cleaning as a standalone service runs $89 to $150. A free estimate includes the inspection, and you’ll get one flat price per system before any work starts. Call (844) 728-0966 for an exact quote. Estimates are free.
Serving Hemet, CA – Our Local Coverage Area
We’re based in the Hemet area and know this community well, and we also provide Lennox service in Winchester. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Hemet
Hemet sits in a semi-arid valley floor surrounded by dry hills, and the wind blows fine silt into homes here far faster than in Riverside’s more sheltered neighborhoods. Add in summer AC running nonstop, and your return grilles pull that dust through the system constantly. In Sun City specifically, the original flex duct from the 80s and 90s is often already compromised, so dust infiltrates through tears and loose joints even when the system is off. We clean the full supply and return, then seal what’s leaking.
Yes, you do. The outer foil jacket on flex duct can look perfectly intact while the inner liner is cracked, torn, or collapsed. Hemet’s heat bakes that liner until it fails from the inside out. A camera inspection shows us exactly what’s happening inside the duct before we clean, so we don’t waste your money cleaning runs that need repair. The inspection is included with our full-system cleaning.
Yes. We clean the coil as part of the same visit when we’re already cleaning the supply and return ductwork. A silt-caked coil is one of the most common airflow killers on Lennox systems in Hemet, especially after a dry, windy spring. We’ll show you before-and-after photos of your coil, same as we do for the ducts.
No. We’re an independent duct-cleaning and repair contractor serving the Inland Empire, and we’re not tied to any manufacturer. That’s the point. We’re free to tell you when a Lennox part is worth replacing with OEM and when aftermarket is fine, without a brand rep’s thumb on the scale. We’ve worked on Lennox systems across the San Jacinto Valley for years, including those in Homeland, and our recommendations come from what we see in attics, not from a corporate training manual.
Absolutely. Duct mastic and tape don’t last forever in attics that hit 140°F or higher during a Hemet summer. Older sealing dries out, cracks, and peels away, especially on rigid metal ducts from the 60s and 70s. When we clean, we inspect the seals and reapply mastic where it has failed. That keeps the air you paid to condition inside the duct, not in the attic. Call (844) 728-0966 and we’ll take a look at yours.
Service Areas Near Hemet
We serve Hemet and the surrounding valley communities. Beyond Hemet itself, our crews regularly work in Perris, Moreno Valley, and the Temescal Valley. We also cover Lennox service in Lake Elsinore and Lennox service in Wildomar for customers on the west side of the range.
Book Your Lennox Service in Hemet Today
If your Lennox system is pushing dust, running weak airflow, or hasn’t been cleaned in years, call us – we also offer Nuevo Lennox service. We’ll camera-inspect, clean, and repair in one visit. Call (844) 728-0966 for a free estimate.
Written by Noel Quintero, Owner at Duct Cleaning Perris, serving Hemet and the San Jacinto Valley.